Browse real K&G Welding projects, including work in progress, fabricated parts, and completed repairs. Select a project below, or open a photograph for a closer look.
K&G Welding repaired a failed steel spring-mounting bracket on a trailer in Jacksonville, Alabama. This job involved a different bracket on the other side of the trailer from the earlier repair. The photographs show the separated frame connection before repair and the completed welds. Trailer welding in Jacksonville · Trailer repair services
View photoBefore · separated bracket at the trailer frameView photoBefore · side view of the failed connectionView photoAfter · bracket welded back to the frameView photoAfter · inner bracket weld and mounting connection
K&G Welding corrected a billboard steel assembly in Guntersville, Alabama after it had been built incorrectly at the factory. The assembly was flipped and the steelwork corrected. The photographs show the expanded-metal sections, steel framing and welded connections from the job. Mobile and commercial welding in Guntersville · Commercial welding services
View photoBillboard steel assembly and expanded-metal sectionsView photoFrame rails, decking and crossmembersView photoBillboard assembly at the work siteView photoOverview of the steel framingView photoFrame viewed from the opposite endView photoWelded bracket and crossmember connectionView photoSteel crossmember and bracket detailView photoClose view of the frame connection weldsView photoMounting plate and weld detailsView photoWide view of the billboard steel assembly
K&G Welding repaired a cracked steel frame section on a semi-trailer in Gadsden, Alabama. The crack was gouged out and welded, then the repaired area was plated with steel reinforcement. The photos show the original damage and the completed welded plate reinforcement. Mobile welding in Gadsden · Trailer-frame repair services
View photoBefore · crack across the steel frame jointView photoBefore · close view of the frame crackView photoBefore · upper edge of the damaged sectionView photoBefore · separation across the frame memberView photoBefore · underside of the cracked frameView photoWider view · trailer frame and work areaView photoCompleted · welded steel plate reinforcementView photoCompleted · inside plate and weld detailView photoCompleted · underside of the plated repair
04
Equipment repair · mobile welding · Collinsville, Alabama
Heavy Equipment Welding Repair in Collinsville
K&G Welding completed an on-site heavy-equipment welding job in Collinsville, Alabama, on equipment used to pump sewage. The project photographs show the pump assembly, the exposed shaft and close-up welding details. Mobile welding in Collinsville · Heavy-equipment welding services
View photoCollinsville jobsite · equipment and exposed shaftView photoExisting shaft and pump housingView photoPump impeller and housing plateView photoShaft connection detailView photoClose view of the shaft repair areaView photoWelding detail at the pump assembly center
05
Commercial welding · steel modification · Fort McClellan, Alabama
Commercial Steel Beam Modification at Fort McClellan
K&G Welding completed this commercial job for Hale Building Company at a Fort McClellan-area jobsite. The existing steel beams were shortened to the required size, with the end plates prepared, refitted, and welded back onto the modified beams.
View photoBefore · steel beams staged for modificationView photoBeam ends marked before cuttingView photoBeam ends shortened and plates removedView photoShortened beam ends prepared for refittingView photoBase plate cleaned and preparedView photoEnd plate refitted and weldedView photoCompleted bracket detailsView photoModified beams with end plates installedView photoFinished beam modificationsView photoCompleted · end plate welded to the shortened beam
06
Commercial repair · mobile welding · Gadsden, Alabama
Lowe’s Loading Dock Welding Repair
On-site commercial welding at the Lowe’s store in Gadsden. Failed loading-dock steel connections were inspected, prepared, refitted, and rewelded to restore secure attachment on both sides of the dock assembly.
Damaged steel sections were located and cut out of the equipment trailer. The repair areas were cleaned and prepared for replacement steel to restore the affected sections.
This trailer hitch replacement was completed in Anniston, Alabama. K&G Welding cut off and removed the old damaged hitch, prepared the steel trailer tongue, and fitted and welded a new hitch securely in place.
View photoOld damaged hitch after it was cut offView photoTrailer tongue prepared after hitch removalView photoNew trailer hitch fitted in placeView photoNew hitch welded · first sideView photoNew hitch welded · second sideView photoCompleted trailer hitch replacement · Anniston, AL
09
Custom fabrication · commercial
Commercial Grill Tops and Ash Pans
New steel grill tops and ash pans were fabricated, fitted to the existing brick stations, and installed for continued use at a commercial property.
Older project · mobile welding · Birmingham, Alabama
Truck Step Welding Repair in Birmingham
A steel truck step had broken loose from its mounting support. The separated steel was prepared, the step was repositioned, and the mounting connection was rewelded during a mobile repair in Birmingham.
View photo
View photo
View photo
View photo
